Team competitions

There are extra steps only needed for team competitions:

Entering Team members

To enter Team members go to participants
The buttons are the same as in an individual event, apart from .
This button is for entering the team members. Enter the name and press "Register". Select the fencer and push the "+".

Draw Up and Down:

1. To draw up and down select 

To draw up and down for all matches when clicking "Draw Team up and down (All)"
To print the team composition sheet select .
To enter the Team compositions select . The following opens

Enter them by selecting the arrow next to the name. Start with the lowest number, the reserve fencer in the end.
It is only possible to reset both sides by selecting reset.
It is requested to print with the "3x Print" button.

2. 

To draw up and down publicly select this button.

Select the cube to draw up and down.
Select the second cube to print the team composition sheets
When selecting "Team composition sheet (not started)" all composition sheets from not started bouts open.
When selecting "Team composition sheet (not finished)" all composition sheets from not finished bouts open.

Enter results

Enter them while using the scanner or via "Result per match"


Enter the results per match.
If a fencer was switched select .
Select "Save".