Touch:Live Scoring/Cyrano + Favero FA-07: Unterschied zwischen den Versionen

Aus Ophardtteam Sportevent

Wechseln zu: Navigation, Suche
(Cyrano + Favero FA-07)
(Cyrano + Favero FA-07)
Zeile 3: Zeile 3:
 
# Please do not plug RJ45  in until the setup has been done. 
 
# Please do not plug RJ45  in until the setup has been done. 
 
# Select in Ophardt Touch under Settings the protocol Favero .0.  for each piste.
 
# Select in Ophardt Touch under Settings the protocol Favero .0.  for each piste.
# For each piste an individual IP is given, please enter it at the scoringmachines.
+
# For each piste an individual IP is given, please enter it at the scoringmachines.<br />Please check and follow the instrutcions of the Favero Manual.
 
# Connect the RJ45 cable  with the switch at eno.1.104 = Favero
 
# Connect the RJ45 cable  with the switch at eno.1.104 = Favero
 
# Connect the RJ45 cable  with the Scoringmachines.
 
# Connect the RJ45 cable  with the Scoringmachines.

Version vom 8. September 2019, 10:34 Uhr

Cyrano + Favero FA-07

  1. Standard IP range Ophardt Server eno1.104 = 192.168.0.15, Port 50100
  2. Please do not plug RJ45  in until the setup has been done. 
  3. Select in Ophardt Touch under Settings the protocol Favero .0.  for each piste.
  4. For each piste an individual IP is given, please enter it at the scoringmachines.
    Please check and follow the instrutcions of the Favero Manual.
  5. Connect the RJ45 cable  with the switch at eno.1.104 = Favero
  6. Connect the RJ45 cable  with the Scoringmachines.
  7. Start via Putty Favero_on  at the server.
  8. All Scoringmachines should now connect automaticaly. 
  9. Check the Pistemonitoring.
  10. In case of disconneted pistes please see Network connection errors.